Uday Industries

Spun/Hume PIPES

Our range of superior quality Spun/Hume Pipes is manufactured using advanced vertical cast automatic machine. These are fabricated as NP3 & NP4 and are constructed in different structures like plain type, Socke & Spigot type. Confirming to BIS 458/2005 Standards.Vibration Casting uses a high grade and low water-cement ratio concrete giving a high strength to the end product. The concrete in the mould is compacted under the external surface.

Spun/Hume Products

Vibrated Casting process pipes for NP3 class and NP4 class

Following are some of the common applications of these products:

For railways and national highways.
For agricultural purposes
For storm water drainage.
For effluent discharge in sewerage.
As road culverts and cross drainage.
Laying telecommunication .
Laying of power cables.

The main features of the Spun/Hume Unit

The manufacturing process is fully automatic. Four people monitor the functioning of the machine and moves the pipes to the drying area with a forklift.
The installed capacity of the machine is to produce 60 pipes for every 8-hour shift
The pipes moved to the curing area by forklift are wrapped in a stretchable film to retain moisture and humidity. After 24 hours of initial curing the pipes are moved to a yard and de-moulded from the pallet and allowed to be further cured.
This machine can produce pipes from inner diameters 300 to 2400 mm with 2500 mm length as per BIS 458/2003 standard.
The process involves machine production of reinforced or unreinforced pipes, round or pre-bed pipes with spigot and socket joint, with rubber joint, egg-shaped pipes, square or rectangular pipes, manholes and other items as per the customer’s requirements.
Normally pipes made by this process of Vibrated/Vertical Casting will have matt finish on both the inside as well as outside.
The concrete is mixed by automated ready-mix plant.